The use of a cable-driven soft exosuit poses challenges with regards to the mechanical design of the actuation system, particularly when used for actuation along multiple degrees of freedom (DoF). The simplest general solution requires the use of two actuators to be capable of inducing movement along one DoF. However, this solution is not practical for the development of multi-joint exosuits. Reducing the number of actuators is a critical need in multi-DoF exosuits. We propose a switch-based mechanism to control an antagonist pair of cables such that it can actuate along any cable path geometry. The results showed that 298.24ms was needed for switching between cables. While this latency is relatively large, it can reduced in the future by a better choice of the motor used for actuation.

This paper introduces a novel mechanical multiplexing system powered by electrostatic capstan clutches, enabling high-force, single-motor control of multiple degrees of freedom (DoF). The system is capable of both bidirectional single-input single-output time-division and single-input multiple-output multiplexing to actuate a commercial 4-DoF robotic hand with a single motor. Our mechanical multiplexer is also capable of powerless position holding owing to its use of a leadscrew nut acting as the output. Experimental results demonstrate the effectiveness of this approach, achieving individual and simultaneous actuation. This innovation offers a scalable solution for high-DoF robotic systems, providing a path to efficient actuation in robotic platforms.